Standard Number:  GB/T 17626.2-1998

Title:  Electromagnetic compatibility--Testing and measurement techniques--Electrostatic discharge immunity test

Language:  Simplified Chinese

Replaced by Standard:  GB/T 17626.2-2006 Electromagnetic compatibility（EMC） - Testing and measurement techniques - Electrostatic discharge immunity test

Replacing Standard:  GB/T 13926.2-1992 electromagnetic compatibility for induatrial-process measurement and control equipment -electrostatic discharge requirements

Publication Date:  1998/1/2

Execute Date:  1999/1/2

Revocatory Date:  2007/9/1

Adopted International Standard:  IEC 61000-4-2-1995 Electromagnetic Compatibility (EMC) Part 4:Testing and Measurement Techniques. Section 2:Electrostatic Discharge Immunity Test Basic EMC Publication First Edition;Replaces IEC 801-2:1991

Status:  

Standard Type:  Generalites

Publisher:  Chinese Standards(GB)

Price:---  

Number of Pages:26P.;A4  

Preface:  

Description:The provisions of this standard electrical and electronic equipment directly from the operator and the adjacent objects of electrostatic discharge immunity requirements and test methods, also states the different environment and installation condition test level and the range of test procedures. The purpose of this standard is to establish common benchmark and repeatable, to evaluate the performance of the electrical and electronic equipment when subjected to electrostatic discharge. In addition, it also includes from the human body to close to the key equipment of electrostatic discharge may occur between objects. Of this standard Rules include: the typical discharge current waveform; The scope of the test level; Test equipment; Test configuration; The test procedure. This standard for "lab" experiment and "test equipment installation after the completion of the" technical requirements are put forward. This standard does not carry on special equipment or system test. Its main purpose is for all relevant professional standardization technical committee to provide a common basic principles. Relevant professional standardization technical committee is responsible for the users and manufacturers) (or equipment Choose to test and determine the test conditions of severe level. In order not to interfere with coordination and standardization of task, strongly recommend that the relevant professional standardization technical committee or users and manufacturers to consider (in their future work or in the original standard revision) using the standard stipulated in the relevant anti-interference test.  

Overview:  

Cross References:
GB/T 13926.2-1992
IEC 61000-4-2-1995,
  

Catalog: